for all your Nurse Call System needs

Call : 1300 766 660

Authorised Reseller





#volusion_ssl_seal { behavior: url(/a/iepngfix.htc); }
Home » Please select your Nurse Call System » Advance Care » Over Door Lights » Over Door Light Single Red Led
Over Door Light Single Red Led




Red Ribbon used with GA-PCT – Shower Pull Call Plate. Compatibility: Please confirm compatibility with NurseCallOnline prior to purchasing.

Features

  • High visibility, Wide viewing angle, Low profile – unobtrusive, Constant brightness technology, Long-life LED, Priority colour-coded, Steady or flashing illumination.
  • Designed to comply with: AS 3811:1998 Hard-wired patient alarm systems for hospitals, AS 2999:1989 Alarm systems for the elderly and other persons at risk, C-Tick Electromagnetic compatibility.

Tender Specifications: Supply and install the Overdoor Lights where indicated on the drawings. The flush mounted Overdoor Light shall be manufactured of polycarbonate plastic with a snap on cover to conceal the fixings. All overdoor lights shall be housed in an enclosure that is aesthetically similar in appearance to the Clipsal Series 2000 Wall Plate. Single Overdoor Light: The Overdoor Light will comprise of a single Red Solid State LED and shall provide a minimum visibility of ten metres indoors, at a 180 degree viewing angle. Double Overdoor Light: The Overdoor Light will comprise of two (Green/Yellow) Solid State LEDs and shall provide a minimum visibility of ten metres indoors, at a 180 degree viewing angle. Triple Overdoor Light: The Overdoor Light will comprise of three (Green/Red/Yellow) Solid State LEDs and shall provide a minimum visibility of ten metres indoors, at a 180 degree viewing angle. The unit is to be fully powered by the Call Controller with no direct or separate power feed required. The units electronics will be protected against power surge, near lightning strike, cable shorts and power reversals. The Overdoor Lights will continue to function regardless of the operation of the Node Controller Unit. Supply and install the Overdoor Lights where indicated on the drawings. The flush mounted Overdoor Light shall be manufactured of polycarbonate plastic with a snap on cover to conceal the fixings. All overdoor lights shall be housed in an enclosure that is aesthetically similar in appearance to the Clipsal Series 2000 Wall Plate.